Siemens SIPART PS2 Electropneumatic Positioner

Description

• 6DR5320-ONG11-0AA0​ → SIPART PS2 Type 5320 (Explosion-protected / Ex d / Flameproof enclosure — EEx d IIC T6 typical)​ — 4–20 mA input (non-bus), single-acting or double-acting (5320 = double-acting; 5310 = single-acting — verify: 5320 = double-acting with two output ports; 5310 = single-acting with one output + bleed port), Aluminum / Copper alloy housing, with local LCD display & pushbuttons for commissioning. “ONG11” defines: O = Basic version w/ display; NG = Ex d flameproof; 11 = 4–20mA input, single/dual action per config.
• 6DR5011-0NG13-0AA0​ → SIPART PS2 Type 5011 (Non-Ex / Standard — polycarbonate or Alu housing)​ — 4–20 mA input, Single-acting (5310-type mechanics inside 5011 form factor — actually 5011 often = non-Ex single-acting; 5020 = non-Ex double-acting)​ — “0NG13”: 0=special/std, NG=non-Ex, 13=4–20mA + HART? No — 13 often = 4–20mA only or HART — check: Siemens codes: last two digits indicate comms: 00=basic 4–20mA, 13=HART 4–20mA typically). So 6DR5011-0NG13-0AA0 = Non-Ex, Single-acting, HART 4–20mA input.
• 6DR5020-0NG00-0AA0​ → SIPART PS2 Type 5020 — Non-Ex (NG), Double-acting, 4–20 mA input (00 = basic 4–20mA no HART) — Aluminum / Poly housing.

Key Features

• Input Signal: 4–20 mA DC (some variants HART / PROFIBUS PA / FF — check suffix)
• Action: Direct / Reverse selectable via menu
• Pneumatic Output: Single-acting (with bleed) or Double-acting (two ports — boosters inside)
• Air Supply: 1.4–7 bar (20–100 psi typical — check nameplate; dual range versions exist)
• Mounting: NAMUR VDI/VDE 3845 (standard — bracket & coupling kit per actuator type — Fisher, Masoneilan, Rotork, etc. — order separate mounting kit if not included)
• Display: Backlit LCD showing setpoint (%), actual position (%), error codes, bar graph — on “O” (display) versions
• Country of Origin: Germany (Siemens A&D / DI PA AS SM)

Model & Variant Reference (SIPART PS2 6DR5xxx Family — Listed Items)

⚠️ Critical Selection & Installation Notes:

1. Single vs Double Acting:
   • Single-acting (Spring-Return actuator)​ → needs positioner with one output port + exhaust/bleed​ (air fills to open/close, spring returns on air loss). Use 5011-type (6DR5011-□).
   • Double-acting (No spring or double piston)​ → needs two output ports (A→port1, B→port2)​ to push/pull. Use 5020/5320-type (6DR5020-□ / 6DR5320-□). Using single-acting positioner on double-acting actuator won’t develop force in reverse direction!
2. Mounting Kit (NAMUR Bracket & Coupling): SIPART PS2 ships with basic bracketsometimes — but for specific actuator brand (Fisher 657/667, Masoneilan 78/87, Rotork Schischek, Samson 3277 etc.) you need the correct NAMUR mounting kit (feedback lever, pin, screw set)​ — order separately by actuator model (Siemens kit: e.g., 6DR4004-1N… for Samson, 6DR4004-2N… for Fisher — check Siemens NAMUR kit cross-ref).
3. Auto Init (Calibration): After mechanical mounting & air supply connected (1.4–7 bar filtered, oil-free, dry), power up 4–20mA signal (~12mA mid-stroke), press Init​ button (or via HART/PDM) → follow prompts (up/down arrows confirm travel limits) → positioner learns full stroke & sets zero/span. Review final error — should be < 0.5%.
4. HART / Bus vs Analog: If you need HART digital comms for asset management (AMS, Simatic PDM) → choose “-NG13-” or “-NG23-” (PROFIBUS PA). Basic 4–20mA (“-NG00-“) has no digital comms — only analog.
5. Fail Mode on Signal Loss: Set via DIP/menu — Fail Safe (go to fail position defined by cam — typically close or open depending on actuator spring) or Hold Last. Verify plant safety requirement before commissioning!

Technical Specifications (Representative — 6DR5020-0NG00-0AA0, Non-Ex Double-Acting, 4–20mA)

Warranty & After-Sales

• Factory new units: 12 months warranty
• Refurbished units: 3-6 months warranty (pneumatic loopback — apply 4/12/20mA → verify output pressure follows setpoint; check auto-init completes)
• Technical support for:
  • Model selection confirmation (Single vs Double acting, Ex vs Non-Ex, HART vs Analog — match your actuator & area classification)
  • NAMUR mounting kit cross-reference (by actuator brand: Fisher / Samson / Masoneilan / Rotork — e.g., Siemens kit 6DR4004-1N… for Samson 3277, 6DR4004-2N… for Fisher 657)
  • Auto-Init / Calibration walkthrough (wiring air supply → power 4–20mA ~12mA → press Init → confirm up/down → save)
  • Fail mode & direction setting (Fail Closed / Fail Open / Hold Last — match spring action of actuator)
  • HART / PDM connection tips (loop resistor 250Ω min for HART — ensure in series if using non-HART power supply)
• Compatible NAMUR brackets, filter regulators (air set — e.g., Siemens 6DR4004-8… or generic 1/4″ FRL), impulse tubing

Delivery Time

• Standard delivery: 3-5 working days (stock items)
• Express shipping available upon request

Why Choose Our Store

• Genuine Siemens SIPART PS2 positioners — not copies with drifting transducer & poor temp. compensation
• Global supply network with competitive pricing
• Expertise in valve positioner selection (single/double, Ex rating, HART/PA/FF, actuator linkage)
• Comprehensive technical documentation (mounting dwg per actuator, init procedure flowchart, wiring diagram)
• Responsive customer service and support

Applications

• Process Control Valves: Position linear globe / rotary butterfly/ball valves per 4–20mA from DCS/PLC — chemical, oil & gas, pharma, pulp & paper.
• Hazardous Area (Ex d versions): Refinery / petrochemical plants — flameproof enclosure meets Ex d IIC T6.
• Asset Management (HART / PA versions): Integrate with plant asset system (AMS, PDM) — read valve travel time, stiction alerts, partial stroke test.
• Retrofit / Spare: Replace older Sipart PS2 (6DR4000 series) or competitor (Foxboro/Fisher FIELDVUE — if migrating to Siemens for commonality) — verify actuator mounting pattern & air supply compatibility.
• Start-up Commissioning: Auto-calibration drastically reduces loop tuning time vs manual cam-adjust mechanical positioners.