Siemens SIMATIC ET 200SP Distributed I/O Modules

Description

• 6ES7134-6HD01-0BA1​ → ET 200SP Analog Input (AI 4×HF)​ — 4 channels, 16-bit + sign, ±10V/±5V/0–10V/0–20mA/4–20mA/RTD, High Feature (diagnostics, MSI/MSR), requires BaseUnit (BU) with blue-green color code.
• 6ES7132-6BD20-0BA0​ → ET 200SP Digital Output (DQ 4×24V DC/2A Std)​ — 4 points, PNP (Source), 0.5A/pt (2A total), BaseUnit NOT included​ — requires black BU.
• 6ES7132-6BF01-0BA0​ → ET 200SP Digital Output (DQ 8×24V DC/0.5A Std)​ — 8 points, PNP, 0.5A/pt — BU separate, black BU.
• 6ES7136-6BA00-0CA0​ → ET 200SP Interface Module (IM 155-6 PN ST)​ — PROFINET IO Device connecting station to PN Controller (S7-1500/1200/300+CP343-1). First white BaseUnit often ships with IM. Server Module (6ES7193-6PA00-0XA0) mandatory at end of station.

Key Features

• Compact: 15 mm per I/O module (vs 30–40 mm ET 200S)
• BaseUnit System: Each I/O snaps onto BU — BU type (white w/ AUX or dark no-AUX) & color (black for DQ, blue-green for AI, white for DI, purple for AO) must match module
• Hot Swap: Replace modules under bus power (with proper HW Config acknowledgment)
• PROFINET Identification: By Device Name​ (assigned via TIA Portal / PRONETA) — not IP alone!
• Default I/O Type: Digital modules are PNP (Source — output switches +24V)​ — no NPN version available
• Country of Origin: Germany / Hungary / China (Siemens Global)

Model & Specification Table (ET 200SP Listed Items)

⚠️ CRITICAL ET 200SP NOTES:

1. BaseUnits (BU) SOLD SEPARATELY​ (except IM often includes first white BU):
   • White BU w/ AUX​ (e.g., 6ES7193-6BP00-0BA0 general white; 6ES7193-6BP20-0BA0 white w/ AUX labeled blue-green for AI) → has AUX1+/AUX1- terminals to feed sensor/actuator supply — use to start a new potential group.
   • Dark/Colored BU​ (e.g., 6ES7193-6BA00-0BA0 black for DQ; 6ES7193-6BP20-0BA0 blue-green w/ AUX for AI) → NO AUX terminals — inherits potential group from last white BU upstream.
     Color MUST match module dot: DQ=Black BU; AI=Blue-Green BU; DI=White BU; AO=Purple BU.
2. Server / Terminal Module: End of ET 200SP station MUST have Server Module (6ES7193-6PA00-0XA0 — inactive plastic placeholder)​ — bus termination required for IM 155-6 PN ST/BA.
3. PNP (Source) Only: ET 200SP DQ = PNP — ON = output connects to BU AUX+ (+24V). If legacy wiring is NPN (switch to 0V) → need interposing relay — no NPN ET 200SP DQ exists.
4. Device Name (PROFINET): Unlike PROFIBUS which uses station address, PROFINET IO uses Device Name​ (assigned via TIA Portal “Assign Device Name” or PRONETA tool) — must match HW Config before IO data exchange starts. IP can be DHCP/BOOTP or static — Name is key!
5. Potential Groups: White BU starts new group — you can feed DI group from isolated 24V sensor supply, DQ group from separate 24V actuator supply, AI group from clean analog supply — all in one rack by placing white BUs at group starts.

Technical Specifications (Representative — 6ES7134-6HD01-0BA1 AI 4×HF & 6ES7132-6BD20-0BA0 DQ 4×24V DC)

Analog Input Module — 6ES7134-6HD01-0BA1

Digital Output Module — 6ES7132-6BD20-0BA0

Warranty & After-Sales

• Factory new units: 12 months warranty
• Refurbished units: 3-6 months warranty (AI: inject 4–20mA → read PIW; DQ: force ON → measure +24V at BU terminal)
• Technical support for:
  • BaseUnit selection (white w/AUX vs dark — by color: DQ→Black BU, AI→Blue-Green BU, DI→White BU, AO→Purple BU)
  • Server Module requirement (6ES7193-6PA00-0XA0 — always install at end)
  • TIA Portal config (insert IM 155-6 PN ST → set Device Name & IP → add I/O → select BU type → download → Assign Device Name via PRONETA/TIA)
  • PNP wiring confirmation (load between Y□ and 0V; BU AUX/COM terminal = +24V feed)
  • Potential group splitting (white BU starts new supply group — feed DI sensors from isolated PSU if desired)
  • Cross-ref ET 200S → ET 200SP migration (density, BU concept, no NPN)
• Optional: BaseUnits (6ES7193-6BP00-0BA0, 6ES7193-6BP20-0BA0, 6ES7193-6BA00-0BA0), Server Module (6ES7193-6PA00-0XA0)

Delivery Time

• Standard delivery: 3-5 working days (stock items)
• Express shipping available upon request

Why Choose Our Store

• Genuine Siemens SIMATIC ET 200SP modules — not gray-market with wrong BU keying or A/D drift
• Global supply network with competitive pricing
• Expertise in ET 200SP system composition (IM + BU selection + Server Module + potential grouping + Device Name assignment)
• Comprehensive technical documentation (BU color-code table, TIA Portal insert screenshot, PNP DQ wiring diagram, AI shielding practice)
• Responsive customer service and support

Applications

• Distributed I/O for S7-1200/1500: Mount near field devices — reduce homerun cables; PROFINET back to CPU.
• Retrofit ET 200S → ET 200SP: 50% space saving, hot-swap, modern diagnostics — keep PROFINET backbone if already using IM 155-6.
• Process Signal Acquisition (AI 6HD01): Read 4–20mA from transmitters / RTD — high-res 16-bit for batch/weigh.
• Valve / Solenoid Control (DQ 6BD20/6BF01): Drive 24V DC PNP solenoid banks — via black BU with AUX+ feed.
• Machine Cell I/O: Compact decentralized I/O in assembly cells — fast commissioning via auto Device Name assignment.