Description
The ifm AC2024, AC2055, AC2032, AC2035, AC2046 are AS-Interface (AS-i) AirBox modules / pneumatic valve terminals with integrated AS-i slave electronics. The “AirBox” concept combines a compact pneumatic manifold (typically for single/double-acting cylinders) with an AS-i 2.0 / 3.0 slave chip — eliminating separate valve drivers, I/O cards, and multi-conductor cables. A single yellow AS-i flat cable powers the module and carries up to 4 inputs + 4 outputs (or proportional/pulse-width variants) to/from the valve terminals. Models differ in number of solenoid outputs, pilot voltage (24V DC), and pneumatic port configuration.
Key Features
- Integrated AS-i Slave: Direct connection to AS-i master (no separate I/O card needed).
- Pneumatic Functions: Controls 2/3-way or 5/2-way solenoid valves for cylinders.
- AS-i Version: AS-i Specification 2.1 / 3.0compatible (check suffix for V3.0 yellow/grey profile).
- Power: 24 V DC pilot (from AS-i or ext. 24V — depends on variant).
- Protection: IP65/IP67 (with proper connector mating).
- Country of Origin: Germany
Model Reference Table
Model | Description | I/O on AS-i | Pneumatic Ports | Typical Use |
|---|---|---|---|---|
AC2024 | AS-i AirBox — 4 solenoids / 2 double-acting cyl. | 4 DO (valve) + 4 DI (optional feedback) | M5 or G⅛ (check sub-suffix) | Compact cylinder control |
AC2032 | AS-i AirBox — 2 solenoids / 1 double-acting | 2 DO + 2 DI (pos. feedback) | M5 / G⅛ | Small actuator control |
AC2035 | AS-i AirBox — 3 solenoids / 1.5 double-acting | 3 DO + 3 DI | M5 / G⅛ | Special function valves |
AC2046 | AS-i AirBox — 6 solenoids / 3 double-acting | 6 DO + 4 DI (some DI on higher cfg.) | G⅛ | Multi-cylinder stations |
AC2055 | AS-i AirBox — enhanced version / alternate porting | Varies per sub-code | G⅛ or push-in | Machine-level pneumatics |
⚠️ Important:
Technical Specifications (Representative — AC2024 AirBox)
Parameter | Specification |
|---|---|
Model | AC2024 (ifm Electronic AS-i AirBox) |
AS-i Slave ID | Auto-addressed by master or set via programming device (AS-i 2.1/3.0) |
AS-i Addresses Used | 1 Standard (4 bit I/O) or Extended (2 addresses) — per profile |
Inputs (to AS-i) | Up to 4 × DI (valve end-position feedback via reed switch in cylinder) |
Outputs (from AS-i) | Up to 4 × DO (solenoid coils 24V DC, ~0.5–1.2 W each) |
Pilot Voltage | 24 V DC (supplied via AS-i AUX or external terminal) |
Pneumatic Medium | Filtered, non-lubricated / lubricated air (40 µm filter recommended) |
Operating Pressure | 2 … 8 bar (typical — check sub-suffix for low-pressure option) |
Electrical Connection | AS-i yellow flat cable (penetration clamp) + M12 (for ext. 24V AUX if needed) |
Pneumatic Connection | Push-in fittings M5 or G⅛ (model dependent) |
Protection | IP65/IP67 (with mated connectors) |
Operating Temp. | 0 °C to +50 °C (air must be above dew point) |
Dimensions (L×W×H) | Approx. 120 × 60 × 45 mm (varies by solenoid count) |
Weight | ~ 250–400 g |
Standards | EN 50295 (AS-i), CE, RoHS |
Warranty & After-Sales
- Factory new units: 12 months warranty
- Refurbished units: 3-6 months warranty
- Technical support for:
- AS-i address assignment & master configuration (ifm CR series / Siemens CP 343-2 / Phoenix RFC 470S)
- Pneumatic port & tubing size confirmation (M5 push-in vs G⅛ threaded)
- AUX 24V wiring when solenoids exceed AS-i power budget
- IODD / GSD file provision for PLC integration
- Cross-check compatibility with Festo / SMC AS-i valve terminals
Delivery Time
- Standard delivery: 3-5 working days (stock items)
- Express shipping available upon request
Why Choose Our Store
- Genuine ifm Electronic AS-i components
- Global supply network with competitive pricing
- Expertise in AS-Interface networks & pneumatic terminal integration
- Comprehensive technical documentation (AS-i profiles, pneumatic flow curves, IODDs)
- Responsive customer service and support
Applications
- Decentralized pneumatic control on packaging / bottling lines
- Conveyor divert / stopper cylinder control via AS-i
- Pick-and-place end-effector valve control (minimizes cabling)
- Retrofit of multi-valve stations to reduce wiring (one AS-i cable replaces 20+ cores)
- Machine modules pre-assembled with integrated AS-i AirBox
Reviews
There are no reviews yet.