Siemens 6SL3210-1PE13-2UL1 / 1PE14-3UL1 / 1PE16-1UL1 / 1PE18-0UL1 / 1PE21-1UL0

描述

• Unfiltered design​ (UL1/UL0 suffix = no integrated line filter) with integrated braking chopper​
• 3-phase 380–480 V AC input​ (±10%), 47–63 Hz
• Heavy Overload (HO)​ capability: 200% rated current for 3 s, 150% for 57 s, 100% for 240 s, ambient -10 to +50°C
• Light Overload (LO)​ capability: 150% rated current for 3 s, 110% for 57 s, 100% for 240 s, ambient -10 to +40°C
• Released for CU firmware V4.6+​ — compatible with CU240E-2, CU250S-2, CU310-2 control units
• IP20 protection, DIN-rail / cabinet mounting

Key Features

• SINAMICS PM240-2 power module​ — modular design pairs with G120 CU control units
• Unfiltered + integrated braking chopper​ — no external brake resistor needed for typical decelerations
• 3-phase 380–480 V AC input​ (±10%), 47–63 Hz
• Output: 3-phase 400V IEC / 480V NEC, 0–550 Hz (V/f), 0–200 Hz (vector control)
• Pulse frequency: 4 kHz​ (adjustable for noise/heat trade-off)
• Dual overload ratings​ — HO (heavy duty) & LO (light duty) for flexible motor matching
• Efficiency >96%​ per IEC 61800-9-2
• IP20 protection, UL open type
• Compact frames: FSA (73 × 196 × 165 mm) for 0.75–3 kW; FSB (100 × 291 × 165 mm) for 4 kW
• CU firmware V4.6+ approved​
• Country of Origin: Great Britain (Siemens)

Technical Specifications — Model-by-Model Comparison

Selection Guide — Which Model Do You Need?

💡 HO vs LO explained: HO (Heavy Overload) is for tough applications — cranes, hoists, extruders, presses — where 200% peak torque is needed. LO (Light Overload) is for fans, pumps, compressors — variable torque loads where 150% peak is sufficient. Most general-purpose motors use the HO rating for safety margin.

Warranty & After-Sales

• Brand new units: 12 months warranty
• Refurbished units: 3-6 months warranty
• Bench test: 380–480V AC power-up → DC bus charges → braking chopper test → load test with simulated motor (verified at rated current per model) → overload trip test (200%/3s) → temperature rise test → insulation test
• Technical support:
  • Model selection​ — we help you pick the correct power module based on your motor power, duty cycle (HO vs LO), and overload requirements
  • CU pairing​ — we verify compatibility with CU240E-2, CU250S-2, or CU310-2 control units (all require firmware V4.6+)
  • Filtered vs unfiltered​ — UL1/UL0 = unfiltered; if you need IEC/EN 61800-3 Class A EMC compliance, we recommend the -AL1/-AL0 filtered variants
  • Braking resistor sizing​ — although a braking chopper is integrated, for high-inertia loads you may need an external braking resistor; we calculate the correct wattage
  • G120 full system configuration​ — we supply the complete drive: power module + CU + BOP-2/IOP-2 + communication module (if needed) + motor cable
  • Migration from MM440 / MM420​ — if upgrading from legacy MICROMASTER drives, we map the equivalent G120 PM240-2 + CU240E-2 configuration
  • CU firmware update​ — we flash CU firmware to V4.6+ before shipment for immediate compatibility
• Optional accessories: CU240E-2 PN/DP control unit, CU250S-2 control unit, BOP-2 basic operator panel, IOP-2 intelligent operator panel, PROFIBUS/PROFINET communication module, SINAMICS SD card (512MB), motor cable, braking resistor (for high-inertia loads)

⚠️ IMPORTANT — Read Before Ordering:

1. This is a POWER MODULE ONLY​ — you MUST add a CU (control unit) to make a working inverter. We can supply the complete G120 drive (power module + CU) as a kit.
2. Verify your motor power​ — select the model based on HO (heavy duty) rating for most industrial applications
3. Unfiltered design​ — if your site requires EMC Class A compliance, choose the “-AL1/-AL0” filtered variants instead
4. CU firmware V4.6+ required​ — older CU firmware will not recognize these power modules
5. Send us your motor nameplate (power, voltage, current, duty cycle)​ — we’ll confirm the exact model and provide a complete G120 bill-of-materials

Why Choose Our Store

• Genuine Siemens PM240-2 power modules — no counterfeit risk (the IGBT power stage, braking chopper, and DC bus capacitor are factory-calibrated; clones fail overload tests, overheat, and have no valid CU communication)
• Full SINAMICS G120 family stock: PM240-2 power modules (FSA/FSB/FSC/FSF), CU control units (CU240E-2/CU250S-2/CU310-2), operator panels (BOP-2/IOP-2), communication modules
• Expertise in G120 system configuration (model selection, HO/LO rating, CU pairing, filtered/unfiltered decision, braking resistor sizing, firmware V4.6+ flashing, MM440 migration)
• Comprehensive technical documentation (dimensional drawings, power module + CU compatibility matrix, EMC filter selection guide, braking resistor sizing chart, G120 commissioning manual)
• Responsive customer support

Applications

• Conveyor & material handling​ — 1PE13/14/16/18 power modules drive 0.75–2.2 kW conveyor motors with HO rating for start-stop, reversing, and load surges
• Pumps & fans​ — 1PE16/18/21 with LO rating (2.2–4 kW) for centrifugal pumps, HVAC fans, cooling towers — 150% overload sufficient for variable torque
• Compressors​ — 1PE16/18/21 for refrigeration, air compression — HO rating handles high breakaway torque
• Machine tools​ — 1PE13–21 across the range for spindle drives, coolant pumps, hydraulic units with precise speed control via CU250S-2 + encoder
• Packaging machinery​ — 1PE13–18 for 0.75–2.2 kW servo-like applications using CU250S-2 vector control
• Textile & printing​ — 1PE16/18/21 for tension control, web handling with CU250S-2 closed-loop vector
• Renewable energy​ — 1PE21 for 4 kW pitch drive motors in wind turbines
• Food & beverage​ — 1PE13–21 for mixers, fillers, cappers, pasteurizers with hygienic washdown (IP20 inside cabinet)
• G120 retrofit / spare parts​ — 1PE13–21 as direct replacements for failed PM240-2 modules in existing G120 installations
• OEM machine builders​ — complete G120 kits (PM240-2 + CU240E-2 PN + BOP-2) for standard 0.75–4 kW machine integrations